How to improve your post-patch performance with GOSU.AI

Try the GOSU AI Assistant for free.

This article is proudly sponsored by GOSU.AI.

When playing games with high skill ceilings that require you to make split-second decisions and memorize a lot of information like League of Legends, picking your champion is something that changes with each patch. 

But with the help of GOSU.AI, which has a constantly updated database of information taken from players of all skill levels based on each patch, you can really help eliminate some of those early struggles.

Being up to date with all of the latest hero buffs and nerfs is easy with the GOSU Assistant, and tips about which champions have jumped in both pick and win rate can streamline drafting for players trying to improve. 

For example, win percentage with Vi has gone up a full 1.61 percent, reaching a 51.31 percent win rate on the 10.13 patch. Along with that The Piltover Enforcer is being picked at a 2.29 percent higher rate, while only being banned 0.25 percent more often. 

In comparison, players will be notified to stay away from picking Yuumi because the magical feline is down nearly 3.5 percent win rate in the patch. These are just some of the little bits of information available after GOSU.AI examined 613,000 Platinum or higher matches. 

With all of this information available in the form of a voice assistant and several other features that are designed to help you master the game, GOSU.AI is ready to assist you. And along with the content already in place, updates such as product localization, live voice-chat with AI, pre-match analysis, party-finder, a news feed, app personalization, and premium content for platform supporters are all being developed and coming soon. 

In just over six months, GOSU.AI has attracted more than one million active monthly users to its application. And now that the app is free and expanding its reach, GOSU.AI aims to become a community hub where players can find new people to play with, get advice from high-rank players, discuss product development, and even participate in community events.

GOSU.AI aims to become a community hub where players can find new people to play with, get advice from high-rank players, discuss product development, and even participate in community events. The team has already established GOSU Club, a premium service for players who want to directly support development, which gives users access to ad-free usage of the app, a direct line to chat with developers, and early access to new features. You can learn more about and join GOSU Club on its official GOSU.AI page. 

The GOSU Assistant is available via both the Overwolf app store and the GOSU.AI website. If you want to take your game to the next level, give the GOSU AI Assistant a try.

Source: Read Full Article


Call of Duty Mobile release date, launch time, patch notes news, trailer, roadmap and MORE

Call of Duty Mobile Season 8: The Forge is about to begin on iOS and Android smart devices. The hugely popular Call of Duty spinoff has amassed a whopping 250 million downloads since launching last October, and has generated hundreds of millions in revenue for Activision. Of course, the launch of a new season means a brand new Battle Pass, which is how games like Call of Duty Mobile generate so much money.

The new Call of Duty Mobile season has a July 10 release date for fans living in the UK.

Due to the time difference, North American players will be able to start playing Season 8 on July 9. 

Based on a tweet posted on the Call of Duty Mobile account, Season 8 will have a 5pm PT launch time in the US. That’s 1am BST on July 10 for UK players.

This is the same time the new Call of Duty Mobile Season 8 trailer will be available to view on YouTube. You can watch the trailer live by hitting play on the YouTube video below.

Call of Duty Mobile fans have also been given a look at some of the new features coming to Season 8, courtesy of the recently revealed roadmap.

The new season of Call of Duty Mobile will launch with the brand new Highrise multiplayer map.

“Highrise is a mid-sized Multiplayer map that deploys soldiers to a construction site atop a towering skyscraper,” reads the official description. “The initial spawns are located to the north and south in opposite facing office buildings, with a helipad and buildings materials in the middle.

“Both spawns offer similar options for approaching the map, with exits straight out the front of the office buildings for direct access to the middle.

“The initial spawns also hold entries to the sneakier tunnel route that leads from one office building through the middle of the map to the other. The buildings themselves feature multiple rooms and scattered office equipment leading to many hectic, close-quarters battles.”

The map also includes an elevated helipad, as well as multi-tiered battlegrounds for unique battles from above and below.

Elsewhere, Call of Duty Mobile Season 8 adds the Juggernaut game mode. 

This is a 5-vs-1 multiplayer mode where the person with the most points wins. The person who kills the Juggernaut becomes the new Juggernaut and so on.

Taking down the Juggernaut nets you the most points, but also makes you a target for other players.

A new Shrapnel perk and two new weapons will also be available at launch, followed by another new perk, weapon and Operator Skill in July.

Activision is also planning to hold the Solstice Awakened in-game event later this month.

As for Call of Duty Mobile Season 8 patch notes, check back later for the full list of tweaks and changes.

Source: Read Full Article


The Best Pre-Built Gaming PCs (July 2020): Rigs For All Price Ranges

Building your own PC requires patience, confidence, and time not everyone can afford. Picking out parts that are compatible with each other is a much easier task than it used to be, but if anything goes wrong it’s up to you to figure out what the problem is. However, there’s a great option out there for those that want to join the PC gaming world but aren’t necessarily ready to build their own gaming PC. Pre-built gaming PCs skip the build step entirely, but even with these already-built rigs, you need to know what you’re looking for. We’ve made it easy by selecting a variety of the best pre-built gaming PCs that are in stock and worth your money.

Pre-built gaming PCs have come a long way over the last couple of years, and while some are still more expensive than the sum of their parts, they’re a convenient and great option for PC gaming. There are also a wide range of prices, much like PC parts themselves. If you’re looking for a more budget-friendly option, then there are plenty with more modest specs to choose from. There are also pre-built gaming PCs that can rock high settings–and yes, your bank account, too.

Some of these pre-built gaming PCs are discounted right now, though it’s important to note that prices on the internet fluctuate regularly: What you see on this page may not reflect what you see when you click through. Please note the correct price before placing your final order. And if you’re looking for a cheap monitor to pair with your new PC, check out our guide to the best budget monitors that are in stock right now. We also have guides on the best gaming keyboards and best gaming mice.

Note: The prices shown below indicate a product’s standard list price and may not reflect any current discounts or other fluctuations.

Gaming PCs under $1000

6477538 – Gaming PCs – Under $1,000

Gaming PCs under $1,500

6477538 – Gaming PCs – Under $1,500

Gaming PCs under $2,000

6477538 – Gaming PCs – Under $2,000

Gaming PCs under $3,000

6477538 – Gaming PCs – Under $3,000

Source: Read Full Article


How To Build A Gaming PC: Step-By-Step Guide (2020)

The PC is the most powerful gaming platform out there. A strong gaming computer has the potential for higher resolutions, faster frame rates, and better visuals than current consoles can even come close to achieving. It can be very tempting to build your own gaming PC, but if you don’t know where to start, it can also be quite intimidating and turn you off entirely. Thankfully, it doesn’t have to be that way. PCs are much easier to build than they were in the past, and while it’s not as easy as putting together a Lego spaceship, you don’t have to be scared of it.

That’s why we’ve put together this straightforward guide on how to build a gaming PC. It’s intended for those who are a little wary of building their first PC or just need a little refresher of the steps to doing so. We’ll cover everything from the prep phase and picking parts to the actual parts like the CPU, GPU, motherboard, CPU cooler, hard drive (and yes, of course, which SSD you should throw in there) build and beyond. Of course, due to the current pandemic, many online stores are experiencing product shortages and shipping delays that could interfere with your PC build, so be sure to check the estimated delivery date when ordering from stores like Newegg or Amazon.

Actually picking your parts can be daunting, especially when you factor in compatibility and power consumption. There are a lot of things to consider, partially because many of your components may rely on your CPU being either from Intel or AMD. Thankfully, PC Part Picker is an invaluable resource that you should absolutely refer to when building a PC. We used the website to build our rig and highly recommend using it for yours. It makes it easy to stay within your budget and lets you know if your components are compatible with each other–it’ll even make suggestions if there are issues with your chosen parts.

If you’re looking for some accessories to round out your new gaming rig, check out the best gaming mice, best gaming headset, best capture card for streaming, best gaming keyboard, and best budget gaming monitors.

  • Tools to use
  • Terms to know
  • A look at some gaming PC builds
    • Our gaming PC build
    • $1,000 gaming PC build
  • How to build a gaming PC
    • Step 1: Prepare your motherboard
    • Step 2: Install the CPU
    • Step 3: Install M.2 SSD(s)
    • Step 4: Install the RAM
    • Step 5: Get your case ready for your motherboard
    • Step 6: Install your motherboard into your case
    • Step 7: Install your power supply (PSU)
    • Step 8: Connect any SATA hard drives/SSDs
    • Step 9: Plug your case and power cables into the motherboard
    • Step 10: Install your CPU cooling system
    • Step 11: Start cable management
    • Step 12: Install your graphics card
    • Step 13: Install your OS
    • If your PC doesn’t turn on
    • Tools to use

      Fortunately, you don’t need many tools or extra parts to build your PC–almost everything you need will be included in your components’ boxes. However, there are a few items you’ll need to have ready before you start building your PC.


      For the vast majority of your build, you’ll be using a No. 2 Phillips screwdriver, but if you’re installing M.2 SSDs into your motherboard, then you’ll want to use a smaller No. 1 Phillips screwdriver for that.


      Thankfully, nearly every smartphone on the market can be used as a flashlight, and you’ll likely need it when installing certain cables and components into your case.

      Thermal paste:

      You’ll want a tube of thermal paste to keep your CPU’s temperature low during use. Most CPU coolers come with thermal paste already applied, which means you won’t need any extra. However, if you do end up buying a tube of thermal paste, you can clean the cooler’s paste off and use your own.

      Terms to know

      We’ve attempted to simplify the process of building a gaming PC as much as possible here, but if you’re not familiar with PC hardware, some of the terms in this guide may need some clarification. We’ve briefly explained some of the parts and terminology we’ll be using below. Feel free to reference this section as you work on your build.

      GPU: GPU stands for graphics processing unit; another name for a graphics card. This will handle displaying images on your PC. The more elaborate and complex these images are, the more power you’ll need from your graphics card. The two big names in the graphics card game are Nvidia and AMD.

      CPU: The CPU (central processing unit, also known as a processor) handles all of the processes and calculations on your PC. For your PC, you’ll choose a CPU from either Intel or AMD.

      Motherboard: The motherboard is where all of the components are installed, allowing them to work together and perform their functions properly.

      SATA: SATA is a type of connection, like USB, that is used for hard drives and SSDs to transfer data

      PCIe: PCIe is another type of connection, though it’s most commonly used for graphics cards and M.2 SSDs

      NVMe: NVMe is a type of connection protocol that can be supported by M.2 SSDs. This provides much faster access to saving and accessing data.

      M.2 SSD: An M.2 SSD is a small stick that provides your PC with storage space. You can get a SATA-based M.2 SSD or a PCIe-based M.2 SSD, the latter of which can support NVMe.

      RAM: The RAM (or random access memory) is used to store data and information that is being processed by the CPU. The more RAM you have–paired with a good-quality processor–the faster your PC can perform its various functions.

      Cooling system: The cooling system is used to protect the CPU from overheating.

      PSU: The PSU (or power supply) supplies your PC and its various components with power.

      OS: OS stands for operating system. Most gaming PCs will utilize Windows 10–it’s what we suggest–though some people may want to install Linux.

      A look at some gaming PC builds

      We’ve included a breakdown of our recommended PC build alongside a much more affordable gaming PC build. This should give you an idea of the vast price range you can expect when starting to build your first PC. More expensive PC builds will absolutely rock your bank account, but they’re more likely to be future-proofed–you won’t need to upgrade the PC’s components for quite some time, and when you do, you likely won’t need to upgrade more than your graphics card. The cheaper PCs can still provide an excellent experience at a much more affordable price, but you may need to upgrade it more often if you want to keep up with new releases. Either way, you’re sure to have a fantastic gaming experience, as long as you keep your expectations in check with your budget. Keep in mind that many a PC build these days lacks an optical drive (since actual disk usage is rare nowadays), but you always add one later if you need one.

      Our gaming PC build

      Exact price: $2,857

      • MSI RTX 2080 Ti Gaming X Ventus graphics card — $1,160
      • Intel i9-9900K processor — $495
      • Gigabyte Z390 Aorus Ultra gaming motherboard — $300
      • 2x Crucial 1TB NVMe PCIe M.2 SSD — $105 each
      • G.Skill Ripjaws V Series 32GB RAM — $150
      • Corsair Hydro H100i RGB CPU cooling system — $170
      • EVGA SuperNOVA 750 G3 power supply — $140
      • Fractal Design Meshify C case — $90
      • Windows 10 Home — $139

      $1,000 gaming PC build

      Exact price: $987

      • MSI GTX 1660 Super graphics card — $250
      • AMD Ryzen 5 3600 processor — $175
      • MSI B450 Tomahawk Max motherboard — $125
      • Crucial P1 500GB NVMe M.2 SSD — $63
      • Corsair Vengeance LPX 16GB RAM — $75
      • Cooler Master Hyper 212 Evo CPU cooler — $35
      • EVGA 500-watt ATX power supply — $50
      • NZXT H510 ATX mid tower case — $80
      • Windows 10 Home — $139

      How to build a gaming PC

      Step 1: Prepare your motherboard

      Parts used: Motherboard

      Assembling the motherboard outside of the case will make your whole experience much easier to deal with. Our general rule of thumb is to install as many parts as possible before screwing it into your case. An important thing to note before starting on your motherboard is that you should refer to its manual as often as possible, as your specific motherboard may suggest specific ways or places to install your components. Also, keep in mind that certain parts will require some force when plugging them in, while others simply just need to be placed into their respective spots. Please pay close attention to the following instructions before installing your components.

      The first thing you’ll want to do is make sure you’re assembling your PC on a flat surface. Don’t build it on a carpet–the mixture of static electricity and your PC’s parts is a dangerous combination and could cause damage to your components. It’s unlikely to happen, but we still suggest touching your metal case from time to time to help ground yourself and avoid this from happening.

      Instead, build your rig in a room with hardwood or laminate floors like a dining room or kitchen–we even went the extra mile and took our socks off. Take your motherboard out of its packaging and then place it on a flat surface. You can lay it directly on your table, but we personally placed it on top of its box to avoid scratching our desk. At this point, you’re ready to start.

      Step 2: Install the CPU

      Parts used: CPU, motherboard

      The easiest part of your entire build is also the first: installing our AMD Ryzen CPU. Your motherboard’s CPU socket will be protected by a piece of plastic, which you’ll be able to remove when you open the tray. All you need to do is gently push down on the tray’s metal arm and pull it out. Once it’s free of the tray, lift it up to open the socket and the protective plastic will fall out. Be sure to keep this plastic piece in case of any issues with your motherboard, as you’ll need to reinsert it before sending it back to the manufacturer.

      At this point, your CPU socket tray should be open, allowing you to install your CPU on to your motherboard. Your CPU should have some small half-circle indents in its board. The CPU socket is designed to fill these indents, making it easy to line up your CPU and install it properly. Once you’ve figured out how to place your CPU into its socket, do so gently. Do not apply pressure directly on the CPU–simply close the tray and make sure the metal arm is locked into its original position, which may require a bit of force.

      Step 3: Install M.2 SSD(s)

      Parts used: M.2 SSD(s), motherboard

      M.2 SSDs are another easy step in the process, but don’t forget to reference your manual to find out which M.2 slots you should use first. Your motherboard may have protective thermal guards on your M.2 slots, so remove those first. Once you’ve taken any guards off the motherboard, you can slot in your M.2 SSDs. These require a little bit of force to slot into their respective slots, but don’t push too hard–they should slide in quite easily. Once the M.2 SSDs are in their slots, the opposite end should be pointing upward at a diagonal angle. At this point, you take the respective screw (that is often included with your motherboard), push each M.2 SSD down, and screw them into the appropriate spots. At this point, you can take the thermal guard and place it on top of each M.2 SSD, screwing it back into place.

      Step 4: Install the RAM

      Parts used: RAM, motherboard

      This is another step where you’ll want to reference your motherboard’s manual, which should be able to tell you which order to place the RAM in. If you have four slots and only two sticks of RAM, then you should make sure the two sticks are spaced apart in either the first and third slot or second and fourth–your motherboard manual can advise you here. Placing your RAM apart like this will help you get the most out of your CPU. First off, be sure to flip down the plastic clips on both sides of each slot you plan on using. Inserting the RAM requires more force, but make sure you start small and then ramp up your pressure gradually. When you hear a click, your RAM is in its slot. This should cause the plastic clips to flip up, gripping your RAM. If you notice your clips haven’t flipped up, then your RAM may not be seated properly.

      Step 5: Get your case ready for your motherboard

      Parts used: Case

      It’s almost time to throw your motherboard into your case, but first you’ll need to screw in some standoff screws that you’ll place your motherboard onto before screwing it in. These standoffs will come with your motherboard, and once you’ve located them, you can start screwing them into your case. There should be about a dozen holes for the standoffs to fit into. Refer to your case’s manual if you’re having trouble finding them. Once the standoffs are screwed in, you’re ready to insert your motherboard.

      Step 6: Install your motherboard into your case

      Parts used: Motherboard, case

      The standoffs make it easy to place your motherboard into your case, but don’t start screwing it in straight away. There should be a space on the back of your case for your motherboard’s I/O ports to fit into. It’ll be a rectangle, and you’ll want your motherboard to be inserted comfortably into this space so that you can access all of the ports. Once everything fits, you can start screwing your motherboard onto the standoffs with the appropriate screws. Don’t forget that you don’t want to screw anything too tightly. Just turn your screwdriver until everything is securely tightened, and then you’re ready to move on.

      Step 7: Install your power supply (PSU)

      Parts used: Power supply, case, motherboard

      Installing the power supply into your case is often quite easy. You’ll want to refer to your specific case’s manual for this, but it’s pretty straightforward. First, we took our case’s mounting bracket and screwed it onto the back of our power supply. You’ll notice your power supply also sports a fan, which is used to circulate air. If you’re planning on placing your finished gaming PC on a hardwood floor or desk, then feel free to aim this fan downward; if you’re placing your gaming PC on a carpeted floor, then you’ll want to aim the fan upward.

      Once you’ve figured out which way your PSU needs to be oriented, and screwed on the mounting bracket, you can easily slide it into your case and tighten the bracket’s screws. Depending on how much room you have for your PSU, you may want to hold off on screwing it in until you’ve plugged in all of its various power cables.

      Step 8: Connect any SATA hard drives/SSDs

      Parts used: SATA drives, case, power supply

      Now that the power supply is installed, you can start connecting any SATA hard drives or SSDs. Your case should have a specific bay area dedicated to holding these kinds of drives. Locate this area, then look for two metal clasps on the left and right side of each bay. Squeeze these clasps and then pull the bay out. Here is where you’ll be able to screw in your SATA drive and keep it stable inside your case. Once this is done, you’ll want to reinsert the bay into its place, and then plug a SATA and PSU cable into your hard drive. Find the SATA slot on your motherboard and plug the other side of the appropriate cable into it, then plug the other side of the PSU cable into your power supply. Your drive is now installed, though you will need to format it once your PC is up and running.

      Step 9: Plug your case and power cables into the motherboard

      Parts used: Case, power supply, motherboard

      Now, you’re ready to start plugging cables into your motherboard. This part requires some patience, as your case cables are extremely tiny and can be difficult to orient. You’ll want to reference both your case and motherboard manuals during this step. Some motherboards, like our Aorus Ultra, come with a bus that you can plug the case cables into before inserting them into the motherboard. This makes this step much easier.

      Your case cables make it so you can use the various ports on the front of your PC in addition to the power button itself. Of course, nothing is going to happen when you press that button if you don’t plug your PSU into your motherboard. You’ll want to plug the 24-pin ATX and EPS12V cables into their respective spots on both the motherboard and PSU. You’ll be plugging in all of your power cables into the PSU, including fans, SATA drives, and your cooling system.

      Step 10: Install your CPU cooling system

      Parts used: Cooling system, CPU, motherboard

      Installing your cooling system can be a somewhat nerve-wracking experience, particularly when applying the thermal paste, but it’s a lot easier than it sounds. The first thing you need to do is mount the system’s bracket to the motherboard. You’ll need access to the back of the motherboard tray, as you’ll be screwing part of it to the back of the tray. This’ll give you the spots you need to set the cooler’s pump onto your CPU and motherboard. Before you do this, however, there are a few other steps.

      Liquid-based CPU cooling systems come with a radiator equipped with fans, which you’ll want to screw into your case. Of course, you’ll need to figure out where you want to install it. We recommend screwing it into your case’s top grill, as it’ll allow for more airflow, but some cases may not have a top grill, and you’ll need to install it on the back of the case. Once you figure out what position you’re going to go with, you’ll screw the radiator into the grill itself. Once you’re done this, you’re ready to attach the pump.

      First, you’ll want to apply some thermal paste. Some coolers come with thermal paste already applied; if that’s the case, your cooler’s thermal paste is most likely capable of handling the job, and you may be able to skip this next step. You can also easily remove the cooler’s paste with a dry cloth if you bought thermal paste you’d rather go with. You’ll want to apply a pea-sized glob of thermal paste into the center of your CPU. During this step, always go smaller than bigger. Once applied, you can press the cooler into its position on the CPU and thermal paste. If you feel like you’ve accidentally applied too much thermal paste, don’t worry: It’s as easy as wiping the CPU off with a dry cloth and rubbing alcohol and trying again.

      Once the pump is installed, you’ll want to make sure all of your cooling system’s wires are plugged into the right spots. Our particular cooler required us to plug a micro-USB cable into our pump and the other side into our motherboard.

      Step 11: Start cable management

      Parts used: Case

      Before we move on to the last step of physically building your PC, you may want to do some cable management to clean up. This’ll create some room for air circulation and accessing your components if you ever want to upgrade later. Most cases come with Velcro straps or zip ties, but I always keep a bag of Velcros on hand just in case. The case we went with, Fractal’s Meshify C, includes an awesome area for cable management that’s equipped with a series of Velcro straps. It’s located on the back of the motherboard tray. We were able to slide all of our cables into this space and keep it all fastened up nicely.

      The only zip ties we used were for our CPU cooling system’s wires, which were thin and plentiful. This made it easier for us to orient them through the holes in our case to reach our desired spot. Just make sure you don’t over-tighten your zip ties as doing so could damage your cables.

      Step 12: Install your graphics card

      Parts used: Graphics card, motherboard

      Finally, it’s time to discuss the component you’re probably the most excited about. The graphics card is easy to install. First, you’ll need to remove an appropriate number of expansion slot inserts from the back of your case to fit your graphics card. This will vary depending on which GPU you go with, but two is usually the safe number–our MSI GeForce RTX 2080 Ti takes up two. Once you unscrew and remove them, figure out which PCIe Express slot you’ll need to insert your card into, then flip its plastic notch at the far end of the slot downward to prepare for installation. At this point, all you need to do is line up the graphics card with the PCIe Express slot and then push down until the plastic notch flips up and clicks. Again, you don’t need a lot of force to push it in, but you will need to push the graphics card into its slot until you get that click. Once you hear that, you can screw your graphics card’s mounting brackets into the case using the expansion slot’s screws and holes.

      At this point, you need to plug your graphics card into your power supply to give it power. (Low-end graphics cards don’t typically require extra power, so if that’s what you’re working with, you’re good to skip this step.) Take the appropriate cables included with your power supply and plug one end into the graphics card; then, plug the other into the PSU. It’s okay if there are parts of the cables that go unused–just make sure every port on the graphics card has part of the cable plugged in.

      Step 13: Install your OS

      Parts used: USB thumb drive, case

      Once you’ve ensured a tidy PC with all of your cables managed, you should connect an HDMI cable to your PC and plug the other end into a monitor. Plug the power cable into your PSU and the other end into an outlet; then, flip the power switch on the back of your PC to its “On” position. Press the power button on your PC, and if it turns on, you’re almost good to go.

      At this point, you’ll need another PC and a fast USB drive of at least 8GB–we suggest the SanDisk Extreme Pro. You’ll then want to head over to Microsoft and follow the steps provided there. This will help you create an installation device out of your USB drive, which you can plug into your PC before booting it up. Upon starting your PC, it should go straight into the Windows 10 installation process. Follow the steps here and wait for it to install. Once you’re done, you should be good to go, though you will need to buy a proper license for Windows 10 from Microsoft. If you do this from your new PC, it’ll activate automatically. On this is all setup, you’re good to go, barring the installation of an optical drive, if you chose to get one.

      If your PC doesn’t turn on

      If your PC doesn’t boot, don’t worry: It’s certainly not the end of the world. There are a number of things that can cause a PC to not boot up on your first try, and save for any product malfunctions, they’re easily solvable. Here are a few things you can do to troubleshoot your powerless PC.

      Is the power supply plugged into an outlet?

      This is a simple fix. Just plug your PC into an outlet, and you should be good to go.

      Is the power supply’s switch turned on?

      Make sure you’ve flipped your PSU’s switch into the ‘On’ position before powering on. This is an easily overlooked issue with a solution that’s just as easy.

      Are your power supply cables seated in the motherboard properly?

      This is the next thing you should double-check. Reconnecting the cables could be what you need to finally deliver power to your PC.

      Are your case’s cables plugged into your motherboard properly?

      It’s important to get this step right because if you push your case’s power button and its specific cable isn’t plugged in correctly, it won’t be able to start your PC. Some motherboards come with a serial bus that you can plug your case’s cables into before connecting to your motherboard.

      Are your parts installed correctly?

      This is the last thing to check as it can be the most time-consuming. Reconnecting your RAM and CPU or simply switching the RAM sticks into different slots could be the solution you’re looking for.

      If all this fails, then your components may be defective.

      Unfortunately, this can happen. Sometimes when building a PC, you realize that one of your components isn’t working correctly. At this point, you’ll need to contact the manufacturer of your part and ask them about their return policy. The vast majority of big PC component manufacturers have return policies that will cover defective parts, so you don’t have to worry. It just might take a little longer to enjoy your brand-new gaming computer.

      More Tech Picks From GameSpot

      • The Best Nintendo Switch Controllers You Can Buy
      • The Best VR Headsets In 2020
      • The Best Budget Monitors Under $200
      • The Best Gaming Laptops In 2020
      • The Best Gaming Keyboards In 2020

      Source: Read Full Article


Envy Gaming Names Adam Rymer as CEO, Mike Rufail Moves to Chief Gaming Officer

Envy Gaming has brought on Adam Rymer as its new CEO, with an official start date of July 13. Rymer will lead business initiatives for Envy as it expands its operational offerings in esports with a focus on digital media, merchandising, and content creation. Additionally, Mike Rufail will leave the position of CEO to take on the newly created role of chief gaming officer.

Rymer brings 20 years of experience in media to Envy. Previously Rymer served as president of Legendary Digital Networks and Nerdist Industries and acted as a consultant to multiple new media companies.

In his new role as  CGO, Rufail will be responsible for scouting, recruiting, and working with the organization’s competitive players and coaches. He will also lead the team operations staff and will keep his position on the board of directors.

Envy Gaming owns and operates the Overwatch League’s Dallas Fuel team and the Call of Duty League’s Dallas Empire. It is also a founding member of Flashpoint, a professional tournament series for Counter-Strike: Global Offensive. Envy also operates Rocket League, Super Smash Bros., and Magic: The Gathering teams.

Source: Read Full Article


FIFA 20 Premier League POTM for June 2020: First EPL reveal since season restart inbound

FIFA 20 Premier League POTM for June 2020 is going to be announced by EA Sports shortly. Voting for the next FIFA 20 Premier League POTM has now closed after opening last Friday. And the reveal of the FIFA 20 Premier League POTM for June 2020 looks set to take place on Friday July 10.


  • Forget FIFA 21 and Pro Evo Soccer, arcade football is back this August

Previously FIFA POTM winners have been announced by the EA Sports FIFA Twitter account at 3pm UK time on a Friday.

So keep an eye out for a FIFA 20 POTM announcement around then.

Voting for FIFA 20 Premier League POTM June 2020 had been open on this page. Here are details on the POTM nominees and their current FUT card ratings…

Conor Coady • Wolves • CB – OVR 77; Bruno Fernandes • Manchester United • CAM – OVR 85; Danny Ings • Southampton • ST – OVR 76; Raul Jimenez • Wolves • ST – OVR 80; Anthony Martial • Manchester United • LW – OVR 83; Allan Saint-Maximin • Newcastle United • RW – OVR 79

Past FIFA 20 Premier League POTM winners include Sergio Aguero, Trent Alexander-Arnold and Teemu Pukki.

The upcoming FIFA 20 Premier League POTM announcement for June 2020 comes hot on the heels of the reveal of the recent Team of the Week squad.

Here are more details on the FIFA 20 TOTW 40 line-up which EA announced on Wednesday…



Skorupsi – GK – 81 – Bologna


Tarkowski – CB – 86 – West Ham

Jesus Navas – RB – 84 – Sevilla

Mario Rui – LB – 82 – Napoli


Saul – CM – 88 – Atletico Madrid

Vlasic – CAM – 84 – CSKA Moscow

Raul Garcia – CAM – 83 – Athletic Bilbao

Berge – CM – 82 – Sheffield United


Dybala – ST – 91 – Juventus / Piemonte Calcio

Aubameyang- LW – 91 – Arsenal

Vardy – ST – 88 – Leicester City


McCarthy – GK – 81 – Southampton

Schurpf – LWB – 81 – FC Luzern

Oliver Torres – CM – 82 – Sevilla

Linetty – ST – 81 – Sampdoria

Sanchez – RM – 86 – Inter

Matheus Pereira – ST – 84 – West Brom

Benrahma – LW – 83 – Brentford


Kim In Seong – LM – 78 – Ulsan Hyundai

Meite – RM – 74 – Torino

Wunderlich – CAM – 75 – FC Viktoria Köln

Junker – ST – 79 – Bodø/Glimt

Simy – ST – 79 – Crotone

Source: Read Full Article


Sony Invests $250 Million Into Fortnite Dev Epic Games, But Not For PS5 Exclusives

Sony and Fortnite developer Epic Games have announced a new kind of partnership, with Sony investing $250 million for a minority stake in Epic, according to a GamesBeat report. It’s unclear what percentage Sony now owns, but this is not a controlling stake in the company.

The deal solidifies the already-close relationship between Epic Games and Sony, with the two teaming up more recently to show off the advanced technology of Unreal Engine 5 running on a PlayStation 5. Sony’s investment will allow the two to “create unique experiences for consumers and creators,” GamesBeat said.

Unreal Engine, Epic Games’ proprietary creation toolkit that many modern games are built upon, has become increasingly popular since its inception in 1998. Originally built for first-person shooters like Unreal, UE is now one of the most popular engines used in game development, powering titles such as Gears 5 and many more.

It’s worth noting that the Chinese internet giant Tencent has also invested in Epic Games, paying $330 million to own 40% of the company back in March 2013.

Though Sony has invested in Epic Games, Epic has confirmed that the deal doesn’t preclude it from publishing titles on other platforms. Additionally, Epic has confirmed that Unreal Engine 5 will appear on both PlayStation 5 and Xbox Series X. “If Sony gets any advantage from investing in Epic, it isn’t clear from this deal,” GamesBeat said.

In a statement provided to GamesBeat, Epic CEO Tim Sweeney said both companies plan to build a “more open and accessible digital ecosystem for all consumers and content creators.”

Play For All 2020 News And Events

  • GameSpot Play For All Week 6 – What To Expect This Week
  • GameSpot's Play For All: Here's How To Donate
  • Ubisoft Forward: Date, Stream Start Time, Free Watch Dogs 2 Offer, And More
  • Xbox Series X Event Confirmed For July 23
  • PS5 Reveal Event: All Games And Console Details Announced

Source: Read Full Article


Valve's Cancelled 'Vader' VR Headset Would Have Cost $5000

Before Index, Valve’s ‘Vader’ VR headset aimed for extremely high resolution in a compact design.

The information is revealed in ‘Half-Life: Alyx – Final Hours’, an interactive storybook written by Geoff Keighley, who was given unprecedented access to Valve offices and staff. The book is available on Steam for $10.

Throughout 2013 and in early 2014, Valve was working with then-startup Oculus on virtual reality. The two companies shared research, ideas, and resources, with Valve indicating it expected Oculus to provide the hardware while Steam would continue to be the digital marketplace.

This ended around the time Facebook acquired Oculus in March 2014. Shortly after, Valve partnered with Taiwanese hardware company HTC. HTC made its name as the first major Android phone producer, and had a reputation for rapidly moving from prototype to shipping.

In March 2015 the HTC Vive was announced, and in April 2016 it shipped as the first consumer room scale virtual reality system.

According to Keighley’s new book, Valve CEO Gabe Newell wanted the company to “move beyond HTC”- to produce a first party headset tightly integrated with first party VR games- similar to Nintendo’s model. This began the ‘Vader’ project.

We weren’t going to be held back by third party and business realities, so we went a little crazy with our design for Vader. HTC helped us figure out what could be productized, but without that tension, we sort of maxed out everything on Vader” – Valve Programmer Pierre-Loup Griffais

Valve engineer Jeremy Selan is quoted saying the design had fundamental mechanical and technical architecture problems. According to Keighley’s sources, if the headset “had somehow been manufacturable”, it would have cost “upwards of $5,000”.

Vader reportedly took 12 months of the VR hardware team’s work, and was then cancelled. While this delayed a Valve headset shipping to the world, some important features of Vader were incorporated in the successor project ‘Frank’; Knuckles controllers, Lighthouse 2.0 base stations, and the off-ear audio design.

In June 2019, ‘Frank’ shipped as Valve Index, priced at $1,000 for the full kit.

Source: Read Full Article


Monster Hunter World: Iceborne Title Update 4 Out Now, Adds Frostfang Barioth, Alatreon

Fans have been waiting a while for the latest update for Monster Hunter World: Iceborne, and it’s finally here. Title Update 4 was delayed due to the onset of the coronavirus crisis, but it finally arrived on PS4, Xbox One, and PC on July 8. It adds the fearsome black dragon Alatreon to the game, which can change its elements at a whim.

As a dev diary video notes, the update also includes a new variant to the ice wyvern, dubbed Frostfang Barioth. This rugged monster has the ability to inflict the frostbind ailment, which makes it much more difficult to avoid its onslaught of attacks. As always, both of these new monsters have exclusive armor for players to craft from their loot.

The patch includes several more general changes to the game, such as the ability to meld special tracks that will allow players to hunt specific monsters in the Guiding Lands. It also prepares the game for some upcoming seasonal events, including the Sizzling Spice Fest, which runs from July 22 to August 6. Full patch notes below.

Monster Hunter World: Iceborne Title Update 4 Patch Notes


  • Alatreon has been added. (Alatreon will be available after finishing the story of Iceborne and completing the Safi’jiiva recon assignment)
  • Frostfang Barioth has been added. (Frostfang Barioth will be available in a limited-time event quest, and appears as a tempered monster)


  • Added new melding options for creating analyzed special tracks.
  • New decor can now be placed in your room in Seliana.
  • New BGM can now be played in your room in Seliana.
  • New designs for the Squad Card added.
  • New Pendants added.


  • Increased the number of Screamer Pods you obtain when combining Screamer Sacs.
  • Adjusted the Steamworks reward items received when ending the mini-game with one match.
  • The Raider Ride Call icon now displays on the item bar sorting screen even while you are in base.
  • Added the following charms: Draw Charm III, Phoenix Charm III, Fitness Charm V

Bug Fixes and Balance Adjustments


  • Fixed an issue where the level effect after unlocking the level cap for some skills would not display in the skill info screen.
  • Fixed an issue where in certain situations, the Safi’jiiva recon assignment would not appear for the character in the 2nd saved data slot.
  • Fixed an issue that occurred in the Guiding Lands rewards screen, where if the item box was at max capacity, items would be discarded instead of being sold.
  • Fixed an issue with some items being sorted in an unnatural order.
  • Fixed an issue where the game would not recognize that the player has met the criteria for the research request “Velkhana’s Icy Breath!”
  • Changed the quest ranking of the event quest “The Assassin” from master rank 3 to 5. This does not affect the quest itself or conditions to join.
  • Fixed an issue that occurred in the Guiding Lands section of the hunter notes, where the material rarity drop for certain levels of monsters were not displaying correct information.
  • Fixed an issue where if the player downloaded uploaded photo data, the icon that indicates when a research request could be submitted would disappear.
  • Fixed an issue where certain steps would result in the “!” icon indicating an important dialogue would not display over an NPC’s head.
  • Fixed an issue that occurred while editing a Squad Card, where performing certain controls while selecting a card design would result in not being able to select anything properly.
  • [PS4] Fixed an issue where the OPTIONS button controls would be enabled while editing a Squad Card.
    [XBOX] Fixed an issue where the Menu button controls would be enabled while editing a Squad Card.
  • Fixed an issue with the Elder Melder, where under certain conditions, an unobtainable item would appear in the list.


  • Fixed an issue where a monster mount would not be canceled when certain monsters were paralyzed or put to sleep while in mid-air.
  • Fixed an issue where a Wyrmstake Blast lodged into Safi’jiiva would disappear if you returned to camp.
  • Fixed an issue where the rocks in Origin Isle could not be destroyed while the host player was in the tent.
  • Fixed an issue where small size Moonlight Gekko wouldn’t appear in the Elder’s Recess.
  • Fixed an issue where master rank Kulu-Ya-Ku and Tzitzi-Ya-Ku would not drop slinger ammo when their health decreased.
  • Fixed an issue where if Kulve Taroth’s attacks were canceled under certain timing, only the damage hitbox would come out.
  • Fixed an issue where rewards for breaking Rajang’s tail would not appear in the results screen.
  • Made adjustments to mitigate the occurrence of the clutch claw hit and grapple position being greatly different on certain monsters.
  • Swapped out the rewards for capturing a tempered Gold Rathian in the Guiding Lands from Elder Spiritvein Bone to Spiritvein Solidbone.
  • Changed the reward item for the quest “Put That Red Cup Away” from Large Wyvern Gem to Fey Wyvern Gem.
  • Fixed an issue where if Raging Brachydios’ tail was wounded, the tip of its tail would not become softened.
  • Fixed an issue where the player would still be afflicted with abnormal status despite successfully countering certain attacks from certain monsters.
  • Fixed an issue where, under certain conditions, Raging Brachydios could be captured.
  • Fixed an issue where the Temporal Mantle would not be effective against certain attacks from Namielle.
  • Fixed an issue where master rank Kulve Taroth’s gold mantle would not soften during a mount.


  • Fixed an issue where certain weapons would appear unnatural when sheathed.
  • Fixed an issue with the Orion/Orion α armor and layered armor sets, where the arm part would display unnaturally when equipped.
  • Fixed an issue with the Kjárr Pipe “Water” hunting horn, where melody effects would stop even if performances continued.
  • [PS4] Fixed an issue with the sword & shield, where after rising from being blown back, pressing the Circle button with certain timing would cause you to perform a backstep.
    [XBOX] Fixed an issue with the sword & shield, where after rising from being blown back, pressing B with certain timing would cause you to perform a backstep.
  • Made adjustments so that when using items with the custom radial menu, if the item doesn’t exist and the materials for the high priority crafting recipe aren’t available, the game will try to craft items for the low priority recipe if materials are available.
  • Fixed an issue where the values on the status screen when Non-Elemental Boost was active would not display correctly with certain weapons.
  • Fixed an issue where slinger ammo would fire in a different direction than the reticle when fighting Kulve Taroth.
  • Fixed an issue that occurred when carving from Safi’jiiva, where the default carving animation would be performed even though it’s a rare material.
  • Fixed an issue where the player character would appear unnatural when using specific hairstyles and armor together.
  • Fixed an issue where the item order in the item selection window would change when the Mushroomancer skill was in effect.
  • Fixed an issue that if a player is equipped with a bow and then checks the details of a player using a bowgun from the player list, the status screen would display unnaturally.
  • Fixed an issue where if the player adjusted the Item Display On/Off setting for Fixed Items while in base, the item would be displayed at the end of the list regardless of the player’s settings.
  • Fixed an issue where the player would not land correctly when they hit a wall at a specific position.
  • Fixed an issue that occurred when the option Obtained Item Placement was set to End of the item bar, during a quest, the Raider Ride Call position would not be correctly kept.
  • Fixed an issue where certain parts of the player character would not be displayed at the result screen, if they failed a quest or reset a quest while their heads were in a snowman state.
  • Fixed an issue that occurred during Safi’jiiva’s Sapphire of the Emperor or Behemoth’s Ecliptic Meteor, where the visuals effects of Demon Ammo and Armor Ammo would be displayed even if they didn’t receive the effects themselves.


  • Corrected various typos, etc., for some equipment descriptions.
  • Fixed an issue where after watching the “Nature’s Might” cutscene in the gallery, starting the game and completing the quest “Faraway Lorelei” would cause the game to go mute.
  • Adjusted the Scarred Yian Garuga quest so that accidental starts could not occur during the quest, as players could be put into an extremely disadvantageous situation at the start of the quest.
  • Fixed an issue with the in-field Palicoes, where text displayed would not match the current situation.
  • Fixed an issue where sound would not play when using stickers via the custom radial menu.
  • Fixed an issue that caused an application error when hosts were swapped under certain conditions during the Eternal Gold Rush quest.
  • Other miscellaneous bug fixes have also been made.

Source: Read Full Article


Call of Duty Modern Warfare Twitch Drops: Unlock a new Warzone Loadout today

Activision has announced a new way for Call of Duty Modern Warfare gamers to unlock a new Blueprint.

And not only is this Blueprint a Grau variant, but it can also be used during a game of Call of Duty Warzone.

So it’s well-worth watching one of the new Call of Duty Modern Warfare Twitch Drops this week if you’re looking to revamp your loadout.

It’s also a good way for new COD gamers to get their hands on a Grau variant without needing to jump in with a basic version of the Grau.


Starting today, Call of Duty Modern Warfare gamers can watch Twitch Drop enabled streams on the platform to unlock new rewards.

As mentioned above, one of these is a Grau variant called ‘Bloodstream’ and it’s not the only reward on offer.

Gamers can also unlock the Censory Overload’ spray and the ‘Love the Bomb’ emblem if they watch longer enough.

To unlock all three and have a chance to update your Warzone Loadout, you will need to watch the right stream for over three hours.

A description of the Bloodstreams describes it as a “well-controlled and accurate configuration of Assault Rifle Juliet.

“Ideal for mid-range engagements in Multiplayer and Warzone, handle waves of enemies with ease thanks to the Sleight of Hand weapon perk for fast reloads and the Tac Laser to easily aim from the hip.”

To get yourself ready for Call of Duty Modern Warfare Twitch Drops, you will need to have a COD account that has been linked to an active Twitch account.

Modern Warfare Twitch Drops will be running from July 9 at 10 AM PT to July 16 at 10AM PT, meaning you only have a short window to do all of this.

Gamers will need to head to Twitch and get a look at the streamers who are playing Modern Warfare including Warzone in the Modern Warfare category.

On drop eligible streams you’ll see a callout that “drops are enabled”, so you know you are officially watching and earning. From there, click the stream and enjoy the gameplay.

You can watch multiple streamers or one stream but as long as they are “drop eligible” your total watch time will be tallied up, so you can earn rewards.

So COD fans will need to make sure they have done everything right to make sure they qualify for this latest round of free rewards.

Here are some of the steps as confirmed by Activision today:

“Registering for a Call of Duty account is a relatively easy process that gives you some awesome benefits.

“Accounts make it possible for cross-play to be enabled in Modern Warfare including Warzone. Plus, you can get the latest intel and personalized stats.

“If you already have an account, you’re all set.”

“Once you have a Call of Duty account, connect it to your Twitch Account, so you can start earning!

“If you already have a Twitch account linked, you may need to re-link. Re-linking ensures you have enabled the correct permissions, so you can earn rewards.”

To link you account to Twitch, you will need to go to the Call of Duty website and update your profile with the latest information.

That page can be found here and should help you get started with the Twitch Drop process.

Source: Read Full Article